Nikon VBA23001 - Buzzer Unit

VBA23001-R.3762.A
- A33 ･ D90 -
・Attach the two sponges (#753).Attach the two sponges (#753).
・Attach the sponge (#766).Attach the sponge (#766).
・Attach the sponge (#761).Attach the sponge (#761).
Sponge (#753)
×
2
Sponge (#766)
Sponge (#761)
・Peel off the backing paper of the buzzer unit (#1055), and attach [#1055].buzzer unit (#1055), and attach [#1055].
Solders must be positioned within
the area specified by the arrow.
The wires must not be placed on the stepped area.
Buzzer unit (#1055)
Buzzer unit
INC