Nikon VBA23001 - AF Driving Base

VBA23001-R.3762.A
- A10 ･ D90 -
・Mount the AF driving base (#B172), and tighten the two screws (#637).Mount the AF driving base (#B172), and tighten the two screws (#637).
・Attach the coupling shaft (#185).Attach the coupling shaft (#185).
・Hook the spring (#195) temporarily as below.spring (#195) temporarily as below.
・Assemble the lever (#193) into the coupling shaft (#185) by fitting in the groove.lever (#193) into the coupling shaft (#185) by fitting in the groove.
・Tighten the screw (#630).Tighten the screw (#630).
Coupling shaft (#185)
Spring (#195)
Screw (#637)
×
2
AF driving base (#B172)
Lever (#193)
Coupling shaft (#185)
Screw (#630)
AF driving base
Grease: LEN317A
INC