Nikon VBA23001 - Bayonet

VBA23001-R.3762 .A
- D70 ･ D90 -
・Remove the three bayonet springs (#112) and the GND plate (#136).Remove the three bayonet springs (#112) and the GND plate (#136).
・Peel off the gasket (#482).Peel off the gasket (#482).
・Take out the screw (#660), and the five screws (#648), and remove the bayonet mount (#111).Take out the screw (#660), and the five screws (#648), and remove the bayonet mount (#111).
Gasket (#482)
Screw (#660)
×
1
Screw (#648)
×
5
Bayonet mount (#111)
Bayonet spring (#112)
×
3
GND plate (#136)
Bayonet
・Peel off the flocked sheet (#816).Peel off the flocked sheet (#816).
Flocked sheet (#816)
INC