VBA23001-R.3762.A
- A84 ･ D90 -
If this program is used by the USB interface, installing the USB driver is necessary.
But if the OS is "Windows XP", the driver is already preloaded so it is not necessary to install it.
(1) Connect the camera and PC by USB cable.
Turn camera ON.
(2) When "Add New Hardware Wizard" is displayed, click "Next".
Procedure for installing USB driver
(3) Select "Search for a better drive than the one your device is using now. (Recommended)", and click "Next".
(4) Click "Reference" of "Specify a location" and select the directory where the driver was copied, such as
"C: ¥D90¥PTP". Then click "Next".
To Next Page
Loading...
