Nikon VBA23001 - Hot Shoe

VBA23001-R.3762.A
- A58 ･ D90 -
・Mount the shoe mold unit (#B317), hot shoe (#316) and hot shoe spring (#318).Mount the shoe mold unit (#B317), hot shoe (#316) and hot shoe spring (#318).
・Attach the holder (#321) and the GND plate (#322).Attach the holder (#321) and the GND plate (#322).
・Tighten the four screws (#654) in numeric order as below.Tighten the four screws (#654) in numeric order as below.
#654
×
4
①
②
③
④
GND plate (#322)
Holder (#321)
Hot shoe (#316)
Hot shoe spring (#318)
Shoe mold unit (#B317)
#654
Hot shoe
Oil barrier: NKS-401H
INC