Nikon VBA23001 - Back cover components

VBA23001-R.3762 .A
- D3 ･ D90 -
・Slacken the grip side of the cover first, and then remove the cover wholly.
・Disconnect the FPC of the back cover from the connector on the DG PCB unit.Disconnect the FPC of the back cover from the connector on the DG PCB unit.
・Take out the two screws (#608).Take out the two screws (#608).
・Take out the four screws (#657).Take out the four screws (#657).
Screw (#608)
×2
Screw (#657)
×4
Removal of Back cover
INC