Nikon VBA23001 - Mounting of Back Cover; External Area

VBA23001-R.3762.A
- A100 ･ D90 -
Mounting of Back cover
・Connect the FPCs of the back cover to the connectors on the DG PCB.Connect the FPCs of the back cover to the connectors on the DG PCB.
・Mount the back cover carefully not to pinch the FPCs.Mount the back cover carefully not to pinch the FPCs.
・Tighten the four screws (#657).Tighten the four screws (#657).
・Tighten the two screws (#608).Tighten the two screws (#608).
Screw (#657)
×4
Screw (#608)
×2
7. External area
INC