Nikon VBA23001 - Imaging Power PCB Unit

VBA23001-R.3762.A
- A39 ･ D90 -
・Attach the bottom plate unit (#B67) to the rear body, and engage the hook by fitting in the hole of the GND plate (#140).bottom plate unit (#B67) to the rear body, and engage the hook by fitting in the hole of the GND plate (#140). to the rear body, and engage the hook by fitting in the hole of the GND plate (#140).GND plate (#140).
・Tighten the four screws (#706) in numeric order.Tighten the four screws (#706) in numeric order.
Hook
①②
③
④
Bottom plate unit (#B67)
Screw (#706)
×
4
・Mount the GND plate (#B141) by fitting with the bosses.Mount the GND plate (#B141) by fitting with the bosses.
・Tighten the screw (#683).Tighten the screw (#683).
Screw (#683)
GND plate (#B141)
Imaging power PCB unit
GND plate (#140)
INC