Nikon VBA23001 - Accuracy Inspection and Adjustment (Camera Body Exc. Imaging)

VBA23001-R.3762.A
- A79 ･ D90 -
★
USB cable: UC-E4
AC adapter: EH-5
Accuracy inspection and adjustment (Camera body exc. Imaging)
★
: New tool
Stabilized power supply
Set value ＝ 7.4V 0.3Ω 5.0A
or AC adapter EH-5
Battery tool
J61213
J65216
D90 inspection and adjustment software
To RS232C terminal
Commercially available straight cable
Use [9pin-25pin] conversion connector for a
computer with 9-pin RS-232C terminal.
RJ is not available, so use a commercial item.
＊
Note:
When inspecting/adjusting the shutter speed and when adjusting “battery
check” voltage, be sure to use the battery tool (J61213).
When communications are made by RS232C, supply power from the bat-
tery tool.
SW-ON sets to communication mode.
INC