Nikon VBA23001 - Battery Contact Spring

VBA23001-R.3762.A
- A36 ･ D90 -
・Mount the FG/ID contact spring (#80) and the two battery contact spring (#157) by fitting with the bosses.Mount the FG/ID contact spring (#80) and the two battery contact spring (#157) by fitting with the bosses.
・Tighten the three screws (#619).Tighten the three screws (#619).
・Arrange the wires (back-side) (Orange/Black/Red) as below.Arrange the wires (back-side) (Orange/Black/Red) as below.
・Arrange the wires (bayonet-side) (Red/Black) as below.Arrange the wires (bayonet-side) (Red/Black) as below.
Back-side wire
×
3(Orange/Black/Red)
Bayonet-side wire
×
2 (Red/Black)
Screw (#619)
×
3
Battery contact spring (#157)
FG/ID contact spring (#80)
Battery contact spring (#157)
Battery contact spring
INC