Nikon VBA23001 - Bayonet

VBA23001-R.3762.A
- A8 ･ D90 -
・Attach the spring (#132) to the F-min block (#131).Attach the spring (#132) to the F-min block (#131).
・Mount the front body (#B22) on the three guides.Mount the front body (#B22) on the three guides.
・Attach the F-min spring plate unit (#B135) by fitting with two bosses.Attach the F-min spring plate unit (#B135) by fitting with two bosses.
Bayonet
Be careful of the bosses, because they can be easily broken.
F-min spring plate unit (#B135)
Spring (#132)
F-min block (#131)
Grease: CFD-409Z
Dipping:
INC