VBA23001-R.3762.A
- A9 ･ D90 -
・Adhere the flocked sheet (#816).Adhere the flocked sheet (#816).
・Attache the three bayonet springs (#112) and the GND plate (#136).Attache the three bayonet springs (#112) and the GND plate (#136).
・Mount the bayonet mount (#111). Tighten the one screw (#660) and the five screws (#648) in numeric order ( ①→⑥）.Mount the bayonet mount (#111). Tighten the one screw (#660) and the five screws (#648) in numeric order ( ①→⑥）.→⑥）.⑥）.）..
・Attach the gasket (#482) so that it is not placed on the mount.gasket (#482) so that it is not placed on the mount.
Bayonet spring (#112)
×
3
GND plate (#136)
Flocked sheet (#816)
Grease: LEN-317A
Grease: LEN317A
#112×3
①
②
③
④
⑤
⑥
Gasket [#482] Bayonet mount [#111]
Screw [#660] ×
1
Screw [#648] ×
5
To Next Page
Loading...
