Nikon VBA23001 - Disassembly Procedures; 1. External area; Bottom cover

VBA23001-R.3762 .A
- D2 ･ D90 -
・Tilt the battery cover unit (#B151) at approx. a 35battery cover unit (#B151) at approx. a 35
-
degree angle, and pull it out.
・Take out the two screws (#657), the two screws (#658), the screw (#661), and the two screws (#692).Take out the two screws (#657), the two screws (#658), the screw (#661), and the two screws (#692).
・Remove the bottom cover unit (#25).Remove the bottom cover unit (#25).
35°
Battery chamber unit (#B151)
(#657)
×1
(#658)
×2
(#661)
×1
(#692)
×2
(#657)
×1
1. External area
Disassembly
Bottom cover
Bottom cover unit (#25)
INC