VBA23001-R.3762.A
- A44 ･ D90 -
・Peel off the backing paper of the dust-proof tape of the rear body.
・Mount the front body on the rear body.
・Tighten the two screws (#615), the four screws (#706) and the two screws (#702) in each numeric order.Tighten the two screws (#615), the four screws (#706) and the two screws (#702) in each numeric order..
①
②
③
④
① ①
②
②
(#706)
×
4
(#702)
×
2
(#615)
×
2
4 .Mounting Front body on Rear body..Mounting Front body on Rear body.
・Attach the sponge (#779), the eyepiece mold (#291), and the sponge (#752).Attach the sponge (#779), the eyepiece mold (#291), and the sponge (#752).
・Tighten the two screws (#615).Tighten the two screws (#615).
Eyepiece mold
Eyepiece mold (#291)
Sponge (#779)
Sponge (#752)
Screw (#615)
×
2
To Next Page
Loading...
