VBA23001-R.3762.A
- A108 ･ D90 -
⑫
Initial settings (Factory default settings)
This restores factory default settings. Select the language and video mode. Because this setting of RP DG-PCB
is blank, be sure to set the initial default setting when the DG-PCB is replaced.
⑬
Conrm data
Saving/restoring of the system xed values, image register, TFT register, EEPROM1, 2, 3.
The functions of saving/restoring each data is for sending backup data to Service Planning for analysis, if some
problem occurs.
⑭
Version No./ Serial No.
RISC rmware version and serial number are indicated. Serial number can be written.
※ Whenever the license sheet is replaced, be sure to input the serial number.
To Next Page
Loading...
