Oki Pro1040 - Page 107

- 107 -
Adjusting Color with the Control Panel
2
Use the print results for the color tuning
pattern to check the current color
balance.
(1)
Check the area to be referenced
using "Fine Color Tuning".
The color tuning pattern blocks
are arranged in four rows of 11
columns. The four rows are printed
with the following colors, from top
to bottom: [Cyan], [Magenta],
[Yellow] and [Black].
The 11 columns represent color
tone, and vertical broken lines are
labeled as [Highlight], [Mid-Tone],
and [Dark].
3
Use the print results for the color tuning
pattern to adjust the color balance.
If you are adjusting the color balance,
use the control panel to specify the
shade (Highlight, Dark, and Mid-Tone)
of each color.
This section explains the procedure for
slightly darkening the cyan highlights.
Adjust the colors other than cyan in the
same way.
(1)
Press the scroll button or .
(2)
Select [Calibration], and press the
<OK> button.
(3)
Select [Fine Color Tuning], and
press the <OK> button.
(4)
Select [Cyan Tuning], and press
the <OK> button.