Oki Pro1040 - Page 147

- 147 -
Color Correct Utility
(3)
On the "Select printer" screen that
appears, select the printer to be
adjusted, and then click [Next].
Memo
z
This displays a list of installed printer drivers.
Configure settings for each of the printer drivers.
(4)
On the "Select setting" screen that
appears, select the mode you want
to use as the standard, and then
click [Next].
(5)
To adjust, move the [Gamma],
[Hue], and [Saturation] sliders.
Memo
z
The [Gamma] slider can be used to adjust
overall brightness, while the [Brightness/
Saturation] slider adjusts the output color.
z
Brightness is increased by sliding the [Gamma]
slider to the left.
z
You can change the color being adjusted by
using the printer color buttons.
z
The [Hue] slider adjusts each color in the color
wheel forward (+) direction or reverse (-)
direction. For example, moving the slider in the
plus (+) direction while Y (Yellow) is selected
will move towards G (Green), while moving in
the minus (-) direction moves towards R (Red).
C(Cyan) R(Red)
Y
(Yellow)
G(Green)
B(Blue)
M(Magenta)
(+)
(-)
z
The [Use printer’s unadjusted color.] option
adjusts based on use of colors that are 100%
toner primary colors. Selecting the check box
for this option fixes the [Gamma] slider for
the selected color and performs adjustment so
printing uses the toner blends shown below.
Printer
Color
Result
Cyan (C) Cyan toner 100%
Magenta (M) Magenta toner 100%
Yellow (Y) Yellow toner 100%
Red (R) Magenta toner 100% + Yellow toner
100%
Green (G) Cyan toner 100% + Yellow toner 100%
Blue (B) Cyan toner 100% + Magenta toner
100%