Oki Pro1040 - Page 148

- 148 -
Color Correct Utility
(6)
Click [Print Test].
This prints the "TEST PRINTING
SAMPLE".
(7)
Check the color adjustment result.
If adjustment results are not what you
expected, repeat steps (5) and (6) of
this procedure.
(8)
Click [Next].
(9)
Enter the setting name, and then
click [Save].
(10)
Click [OK].
Note
z
If you update or re-install the printer driver,
created color adjustment names will be
re-imported when you start up the Color
Correct Utility. After confirming that the Color
Adjustment name is shown for [Select Setup],
click [Finish].
(11)
Click [Finish] to exit the Color
Correct Utility.
2
Use a printer driver to select a setup
name, and then print.

Windows PCL Printer Driver
(1)
Open the file to be printed.
(2)
Select [Print] in the [File] menu.
(3)
Click [Preferences] (or
[Properties]).
(4)
On the [Color] tab, click
[Detail], and then select [Simple
Adjustment].
(5)
Select the [Color Correct Utility
Settings] check box, select the
settings you created with the Color
Correct Utility, and then click [OK].
(6)
Print.