Oki Pro1040 - Page 164

- 164 -
Using a Web Browser to Configure the Network Setup
8
Under [STEP5], set the Key PFS.
(1)
For [Key PFS], select KEYPFS or
NOPFS.
(2)
If [Key PFS] is selected, select one
of the following settings for [Key
PFS Diffie-Hellman Group]: Group
2, Group 1, None.
9
Under [STEP6], configure Phase2
Proposal settings.
z
To configure [ESP] settings
(1)
For [ESP Encryption Algorithm],
select one of the following settings:
AES-CBC 256, AES-CBC 192, AES-
CBC 128, 3DES-CBC, DES-CBC.
(2)
For [ESP Authentication Algorithm],
select SHA-1, MD5, or OFF. If you
select [OFF], the ESP verification
algorithm will not be applied.
z
To configure [AH] settings
(1)
For [AH Authentication Algorithm],
select SHA-1 or MD5.
(2)
For [LifeTime], enter and set a
value in the range of 600 (seconds)
to 86,400 (seconds).
10
Click [Submit].