Oki Pro1040 - Page 188

- 188 -
Configuration Tool

Registering a Form (Form Overlay)
You can register logos and other forms on the
printer and overlay them for printing. Here, we
will show how to register a form.

Creating a Form
1
Click [Start] and select [Control Panel]
in [Windows System].
2
Click [View devices and printers].
Note
z
The printer driver has its own function for
registering forms.
Normally, use the form registration function on the
printer driver.
z
Form registration when the length of 1 page of
labels, or of paper, is shorter than 4 inches, is not
supported by this procedure.
Use the form registration function on the printer
driver.
3
Right-click the [Pro1050 PCL6] icon,
and then select [Printer Properties].
4
Select the [Ports] tab, select check
[FILE:] in [Printer Port], and then click
[OK].
5
Create the form you want to register on
the printer.
6
On the application [File] menu, select
[Print].
7
Print.
8
Enter a name for the file to be saved.
9
On the [Port] tab, return the [Printer
port] setting, which you changed in
step 3 of this procedure, to its original
setting.

Using Configuration Tool to Register a
Form on the Printer
1
On the [Plug-ins] menu, select [Storage
Manager].
2
Click [ ].
3
Click [ ], and then select the created
form file.
This adds the form to the project.
4
Click the form file.
5
Enter the [ID], and then click [OK].
Note
z
Do not change the [Volume] and [Path Name]
settings.
6
In the bottom pane of the Storage
Manager plug-in screen, select the
printer.
7
Click [ ].
8
Click [OK].