Oki Pro1040 - Page 60

- 60 -
Table of Setting Items in the Control Panel Menu Screen
z
Shaded areas are factory-set values.
Item Value Description
SMR Setting Cyan 0
～
+3
-6
～
-1
Compensates for uneven print density due to
temperature and humidity, and printing quantity, using
cyan. Raise the setting value if it is blurred. Lower the
setting value if the density darkens partially.
* Continued use with the setting value raised has a risk
of printing stains.
* Continued use with the setting value lowered has a risk
of blurring.
Magenta 0
～
+3
-6
～
-1
Compensates for uneven print density due to
temperature and humidity, and printing quantity, using
magenta. Raise the setting value if it is blurred. Lower
the setting value if the density darkens partially.
* Continued use with the setting value raised has a risk
of printing stains.
* Continued use with the setting value lowered has a risk
of blurring.
Yellow 0
～
+3
-6
～
-1
Compensates for uneven print density due to
temperature and humidity, and printing quantity, using
yellow. Raise the setting value if it is blurred. Lower the
setting value if the density darkens partially.
* Continued use with the setting value raised has a risk
of printing stains.
* Continued use with the setting value lowered has a risk
of blurring.
Black 0
～
+3
-6
～
-1
Compensates for uneven print density due to
temperature and humidity, and printing quantity, using
black. Raise the setting value if it is blurred. Lower the
setting value if the density darkens partially.
* Continued use with the setting value raised has a risk
of printing stains.
* Continued use with the setting value lowered has a risk
of blurring.
White
*1
0
～
+3
-6
～
-1
Compensates for uneven print density due to
temperature and humidity, and printing quantity, using
white. Raise the setting value if it is blurred. Lower the
setting value if the density darkens partially.
* Continued use with the setting value raised has a risk
of printing stains.
* Continued use with the setting value lowered has a risk
of blurring.
*1: Displayed with Pro1050 only.