- 64 -
Table of Setting Items in the Control Panel Menu Screen
USB Setup
z
Shaded areas are factory-set values.
Item Value Description
USB Enable
Disable
Enables/disables access using a USB interface.
Speed 480Mbps
12Mbps
Sets the maximum baud rate using a USB interface.
Soft Reset Enable
Disable
Enables/disables the software reset command.
Serial Number Enable
Disable
Enables/disables the USB serial number.
The USB serial number is used to identify USB
devices connected to a PC.
Offline Receive Enable
Disable
Sets whether to receive data even if offline or a
recoverable error occurs.
To Next Page
Loading...
