- 68 -
Table of Setting Items in the Control Panel Menu Screen
z
Shaded areas are factory-set values.
Item Value Description
Symbol Set Kamenicky
Legal
Math-8
MC Text
MS Publish
PC Ext D/N
PC Ext US
PC Set1
PC Set2 D/N
PC Set2 US
Select the symbol set.
CR Function CR
CR+LF
Specifies the operation when a CR code is received.
LF Function LF
LF+CR
Specifies the operation when an LF code is
received.
Print Margin Normal
1/5 inch
1/6 inch
1/8 inch
1/12.5 inch
Sets the area of the paper where printing is not
possible.
True Black On
Off
Specifies whether to use mixed CMYK or black
toner only for printing black of image data.
Pen Width Adjust On
Off
Compensates so that thin lines are visible.
Color Setup
z
Shaded areas are factory-set values.
Item Value Description
Ink Simulation Off
SWOP
ISO Coated
Japan
Sets the ink simulation. This setting is enabled only
for PS language jobs.
UCR Low
Normal
High
You can select the black plate (black) amount
during color printing.
Setting more black plate economizes on the toner
of the other three colors.
CMY 100% Density Enable
Disable
Enables/disables 100% output for CMY 100% shade
values.
CMYK Conversion On
Off
You can select the method of total toner quantity
control for CMYK data. Select [Off] to disable GCR
(Gray Component Replacement). Furthermore, this
menu setting is disabled if using the ink simulation
function.
To Next Page
Loading...
