- 71 -
Table of Setting Items in the Control Panel Menu Screen
z
Shaded areas are factory-set values.
Item Value Description
Media
Operation
Setup
Inquiry Display On
Off
Specifies the operation when the <FEED> button or
the <UNLOAD> button is pressed.
On:
In the cases below, a confirmation screen is
displayed before the operation is executed.
<FEED>: When the paper changes from a stand-by
state to a through paper state
<UNLOAD/CUT>: When cut is executed
Off:
Operation is performed without displaying a
confirmation message.
Rewinder Distance 600 millimeter
(24 inch)
900 millimeter
(36 inch)
1200 millimeter
(48 inch)
Specifies the amount to be fed when the <FEED>
button is pressed in the stand-by state, using the
output slot as the reference point.
Feed Distance 150 millimeter
(6 inch)
300 millimeter
(12 inch)
450 millimeter
(18 inch)
Specifies the amount to be fed when the <FEED>
button is pressed in the through paper state, using
the current position as the reference point.
Settings
z
Shaded areas are factory-set values.
Item Value Description
Reset Settings Execute Restores the user menu settings to the factory
settings.
Save Settings Execute Saves the current menu settings.
Restore Settings
*1
Execute Changes the saved menu settings.
*1: Displayed when [Save Settings] is executed on the control panel.
Change Password
z
Shaded areas are factory-set values.
Item Value Description
New Password ************ Sets a new password to be entered in the [Admin
menu] and [Boot Menu].
Verify Password ************ Sets a new password to be entered in the [Admin
menu] and [Boot Menu] for which [New Password]
has been set.
Resident Fonts
Item Font Name List
I0 Courier
I1 Courier Bold
I2 Courier Italic
I3 Courier Bold Italic
I4 CG Times
I5 CG Times Bold
I6 CG Times Italic
I7 CG Times Bold Italic
I8 CG Omega
To Next Page
Loading...
