- 70 -
Table of Setting Items in the Control Panel Menu Screen
Others Setup
z
Shaded areas are factory-set values.
Item Value Description
RAM Setup Receive Buffer Size Auto
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32 MB
Sets the incoming buffer size that is assured by the
local interface.
Resource Save Auto
Off
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32 MB
Sets the resource saving area size.
Storage
Common
Setup
Check File System Execute Implements management data (FAT information)
recovery, and resolves mismatches between the
actual (free) space in the file system and the free
space displayed.
Check All Sectors Execute Recovers defective sector information on the HDD and
file system nonconformances.
Enable Initialization No
Yes
Specifies whether or not to authorize setup changes
associated with HDD and flash memory initialization.
Language
Setup
Select Language Chinese
English
French
German
Italian
Japanese
Russian
Spanish
Specifies the control panel display language.
Language Initialize Execute Deletes the message files that have been downloaded.
Also, the [Select Language] setting returns to the
factory default setting.
Job Cancel
Setup
Cancel Key Behavior Short
Long
Off
Sets the operations when the device <CANCEL>
button is pressed.
Short:
Hold down no longer than two seconds to cancel the
print job.
Long:
Hold down for 2 to 5 seconds to cancel a print job.
Off:
Disables the <CANCEL> button.
Inquiry Display On
Off
Sets whether to display the enquiry screen when a
job is canceled.
Focus Position Yes
No
Sets whether to apply [Yes] or [No] focus for selection
in the job cancellation enquiry screen.
Display Timeout 60
～
180
～
300
Sets the display timeout value for the enquiry screen
when a job is canceled.
To Next Page
Loading...
