Olivetti PR2 plus - Page 63

XZAC4219-05 Service Manual
4-9
If the «INTERFACE» parameter has been configured as COM1-USB
Parameter Values possible Description
RS1 EMULATION
See INTERFACE SERIAL1 parameters
BAUD RATE
BIT/CHAR
PARITY
STOP BIT
DSR
DCD
USB EMULATION
See INTERFACE USB parameters
PLUG&PLAY
If the «INTERFACE» parameter has been configured as USB-PAR
Parameter Values possible Description
USB EMULATION
See INTERFACE USB parameters
PLUG&PLAY
PAR. EMULATION
See INTERFACE PARALLEL parameters
PAR. PORT MODE
If the «INTERFACE» parameter has been configured as DUAL-PAR.
Parameter Values possible Description
RS1 EMULATION
See INTERFACE SERIAL1 parameters
BAUD RATE
BIT/CHAR
PARITY
STOP BIT
DSR
DCD
PAR. EMULATION
See INTERFACE PARALLEL parameters
PAR. PORT MODE