XZAC4219-05 Service Manual
4-11
PC TABLE
TABLE 1
Selection of the table of the character generator.
TABLE 2 *
CHAR DEFINITION
LQ
Selection of print definition.
DRAFT *
OCR-A
OCR-B
CPI
10 *
Selection of printing pitch, expressed in number of
characters per inch.
12
15/17,1
COMPRESSED
17,1 *
Defines the spacing selected with ESC >
15
LF + CR
N * Activates (Y) or disactivates (N) automatic execution of
a carriage return (CR) whenever a line feed command
is received (STATION1).
Y
CR + LF
N * Activates (Y) or disactivates (N) automatic execution of
a line feed (STATION1) whenever a carriage return
(CR) command is received.
Y
LF HEAP UP
NEVER *
AFTER EJECT
ESC BEL 0 CHECK
NORMAL *
FAST
ZERO SLASHED
N *
Enables (Y) or disables (N) printing of the zero slash.
Y
LINE LENGTH
80 *
Selection of the maximum length of the print line,
expressed in number of characters at 10 cpi.
90
INSERT MODE
DIRECT *
PR2 LIKE
FORM LENGTH FRONT
12 *
11
Selection of the maximum form length, expressed
in inches.
BOF IBM-PP LIKE
N Selects the type of bottom margin of the form (BOF)
for the document managed.
N - The value of the bottom margin will be 4.23 mm.
Y - The value of the bottom margin will be 13.7 mm.
Y *
Parameter Values possible Description