4-12 Service Manual
XZAC4219-05
"OLIVETTI" menu parameters
TOF IBM-PP LIKE
Y * Selects the type of top margin of the page (TOF) for
the document managed.
N - The value of the top margin will be between
4.23 mm (defined through calibration) for documents
and 7.4 mm for passbooks.
Y - The value of the top margin will be 4.3 mm for
documents and 7.4 for passbooks.
N
PNS SELECTION
N *
Selecting (Y) permits access to the selection menu of
the PNS in the IBM environment.
Y
PNS # 4192
N *
If enabled, on reception of a Form Feed, ejection is
performed regardless of the form length selected.
Y
PNS # 4501
N *
Selects spacing of 1/5".
Y
SAVE PARAMETERS
N
Saves (Y) or cancels (N) the values configured in this
area of the programming menu.
Y *
Parameter Values possible Description
EMULATION
PR2 / PR2E
Selection of OLIVETTI emulationPR40
PNS2845
LINE BUFFER PR40 LIKE
N If PR40 emulation is selected, selecting (Y), the
length of the receiving buffer is set as PR40 (1 Kb)
or 8 Kb.
Y *
TOP MARGIN PR40 LIKE
N If PR40 emulation is selected, selecting (Y), TOF
is managed by a fixed mechanical head (PR 40).
Selecting (N), TOF can be adjusted.
Y *
PASSBOOK
N
If PR2 / PR2E emulation is selected, indicates if the
printer is enabled or not for handling passbooks.
Y *
BINDING
VERTICAL Depends on the "PASSBOOK: Y" item. Selects the
type of binding of the passbook (horizontal or vertical).
If horizontal binding is selected, during printing on the
passbook, the head will exit from the passbook close
to the binding, in order to improve feeding of the
passbook.
HORIZONTAL
Parameter Values possible Description
To Next Page
Loading...
