Omron fh-1 series User Manual

5 - 29
5 Creating Measurement Scenes
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
5-5 Using Variables to Edit the Flow [TDM Editor]
5
5-5-2 Editing Processing Units in a Scene
Additional Information
The following operation also enables processing units to be pasted.
• Click [Paste] from [Edit flow] in the Menu bar.
• Right-click a processing unit on the Unit list (flow) and then click [Paste] on the displayed
shortcut menu.
Additional Information
When attempting to paste a processing unit to the processing unit number 0, a warning dialog
will be displayed.
1 Display the Edit flow tab screen for the scene to edit.
For more details, refer to 5-5-1 Edit Flow Screen on page 5-14.
2 On the Edit flow tab screen, select a processing unit on the Unit list (flow) to delete.
3 In the Edit flow button area, click [Delete].
Additional Information
The following operation also enables processing units to be deleted.
• Click [Delete] from [Edit flow] in the Menu bar.
• Right-click a processing unit on the Unit list (flow) and then click [Delete] on the displayed
shortcut menu.
4 The “Edit flow" dialog is displayed. Click [Yes].
The selected processing item is deleted.
Additional Information
When attempting to delete a processing unit number 0, a warning dialog will be displayed.
The added or edited processing units can be saved or loaded.
 Saving a Processing Unit
1 Display the Edit flow tab screen for the scene to edit.
For more details, refer to 5-5-1 Edit Flow Screen on page 5-14.
2 On the Edit flow tab screen, select a processing unit on the Unit list (flow) to save.
Deleting a Processing Unit
Saving/Loading a Processing Unit

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English