Omron fh-1 series - Page 192

5 Creating Measurement Scenes
5 - 30
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
3 In the Edit flow button area, click [Save Unit].
The FileExplorer dialog box is displayed.
For more details, refer to 3-2-3 Selecting Files and Folders on page 3-10.
Additional Information
The following operation also enables processing units to save.
• Click [Save Unit] from [Edit flow] in the Menu bar.
• Right-click a processing unit on the Unit list (flow) and then click [Save Unit] on the displayed
shortcut menu.
4 Set the save destination folder and file name, and then click [OK].
The processing unit is saved while holding the setting data and variables being used for it.
 Loading a Processing Unit
1 On the Unit list (flow), select a processing unit to be load.
2 In the Edit flow button area, click [Load Unit].
The FileExplorer is displayed.
For more details, refer to 3-2-3 Selecting Files and Folders on page 3-10.
Additional Information
The following operation also enables processing units to be loaded.
• Click [Load Unit] from [Edit flow] in the Menu bar.
• Right-click a processing unit on the Unit list (flow) and then click [Load Unit] on the displayed
shortcut menu.
3 Set the load destination and file name to be loaded.
The loaded processing unit is inserted to the selected position on the Unit list (flow).
Additional Information
When attempting to load a processing unit to the processing unit number 0, a warning dialog
will be displayed.