7 Increasing/Switching Measurement Scenes
7 - 14
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
Use the following procedure and the guidance in the dialog boxes to perform the conversion process.
1 Select [Conversion scene group data tool] from the [Tool] menu.
The Conversion Scene Group Data Tool is started.
2 Click the [Next] button. The [STEP 1] dialog box is displayed.
3 Specify the target data file to convert, the destination data file, and the destination. Then click
the [Next >>] button. The [STEP 2] dialog box is displayed.
To Next Page
Loading...
