8 Setting Windows
8 - 22
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
Common Operations for Window Parts
• Click inside a window part and drag it to change its position.
• Click the outer edge of a window part and drag it to change the size of the part.
For FZ5, drag the icon in the lower right corner of a window part.
• Click the icon that appears on the upper right corner of any window part to open the settings
dialog box for that part.
• The grid line is displayed when you set Alignment.
Each window part can have its size and position adjusted using the grid.
Adding Window Parts
1 Click [Layout] in the menu or right-click and select [Addition of window parts] from the dropdown
menu or shortcut menu displayed. “Addition of window parts” dialog box is displayed.
2 Select a window part to add.
3 Click [OK].
The selected window part is added to the window.
Deleting Window Parts
1 Select a window part to delete.
• For FH series/FZ5-800/1100/1200 series
2 Click [Layout] in the menu or right-click on the window part and select [Delete the window] from
the drop down menu or shortcut menu displayed.
The selected window part is deleted.
• For FZ-5L series/FZ5-600 series
3 Click in the upper right corner of the window part. The selected window part is deleted.
To Next Page
Loading...
