8 - 43
8 Setting Windows
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
8-3 Arranging Windows [Layout Functions]
8
8-3-15 Data Grid Window (MDI_DataGrid.dll)
Col. Width [Blank]
Specifies the variable name for the macro storing the table col-
umn width using up to 32 characters.
However, only those integer type single dimensional array vari-
ables in the macro selected in [Macro Type] can be selected. It
is necessary to specify individual column width by array and
that the array element count be the [Col. Count] or higher.
The range of the column width for the table is from 2 to 65536
columns.
If any of the following conditions are met, then regardless of the
settings, the total column width will be 100.
• Variable is not specified.
• Specified variable does not exist.
If any of the following conditions are met, then regardless of the
settings, the total column width will be 100.
• Columns that the array element is lower than the [Col. Count]
and the [Col. Width] is not defined.
Row Height [Blank]
Specifies the variable name for the macro with the table row
height using up to 32 characters.
However, only those integer type single dimensional array vari-
ables in the macro selected in [Macro Type] can be selected. It
is necessary to specify individual row width by array and that
the array element count be the [Row Count] or higher.
The range of the row height for the table is from 3 to 65536
rows.
If any of the following conditions are met, then regardless of the
settings, the total row width will be 24.
• Variable is not specified.
• Specified variable does not exist.
If any of the following conditions are met, then regardless of the
settings, the row height will be 24.
• Rows that the array element is lower than the [Row Count]
and the [Row Height] is not defined.
Operation Set during screen operation when calling a macro subroutine.
Cell Select [Blank]
Specifies the name of the subroutine (including *) to execute at
cell selection using up to 32 characters.
Cell Edit [Blank]
Specifies the name of the subroutine (including *) to execute
after cell data update using up to 32 characters.
Selected Row [Blank]
Specifies the macro variable to store the cell row numbers for
the selected cells or cells having data updated using up to 32
characters.
However, only integer type variables exist in the macro
selected in [Macro Type].
Selected Col. [Blank]
Specifies the macro variable to store the cell column numbers
for the selected cells or cells having data updated using up to
32 characters
However, only integer type variables exist in the macro
selected in [Macro Type].
Cell Setting Sets the cell to display.
Setting item
Setting value
[Factory default]
Description
To Next Page
Loading...
