9 - 41
9 Saving/Loading Data
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
9-8 Copying Settings for Each
Line in Multi-line Random-trig-
9
9-8-2 Line Maintenance tool operations
This describes the steps for clearing setting data. All types of setting data can be cleared.
1 In the Line Maintenance tool, select the setting data in the After revision area.
Multiple setting data can be selected.
2 After selecting the settings, click the [Clear] button.
The font color of the setting data that will be cleared will change to red.
If setting data was cleared by mistake, click the [Undo] button. The setting data will revert to the
status described in Step1.
Clearing setting data
To Next Page
Loading...
