10 - 7
10 Advanced Usage
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
10-1 Remotely Operating the Controller
[Remote Operation]
10
10-1-1 Environment Settings
Network Settings for Sensor Controller (With Sensor Controller)
Enable the remote operation on the Communications Module Setting and input the IP address.
1 In the Main window, select [System settings] → [Startup] → [Startup setting] from the [Tool]
menu. Select "ON" for the Remote Operation in the "Communication module select" area.
For FHV series, even OFF for the Remote Operation is selected, the connection for the remote
operation cannot be disabled.
2 Click [Data save] to save the settings and restart the Sensor Controller.
3 In the Main window, select [System settings] − [Communications] − [Ethernet (*****)] from the
[Tool] menu. Set the IP address.
The (*****) area indicates the [Serial (Ethernet)] contents set in the above step 1 "Communica-
tion module select".
To Next Page
Loading...
