Omron MicroHAWK V320-F User Manual

6-27
6 Application Settings
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
6-13 Enable USB Drive Mode
6
6-12-5 Disabling Account Management
6-13 Enable USB Drive Mode
Clicking Enable USB Drive Mode in the Application Settings menu brings up the Enable USB Drive
Mode dialog shown below.
When you click the Enable button in the dialog, your reader will reboot, and then you can use it as you
would a USB flash drive. If you click Enable – Don't Reboot, the camera will reboot later.
Important: The USB drive functionality self-disables on the next reader reboot. To enable USB drive
functionality again, follow the same procedure described above.
If you try to enable USB Drive Mode when it's already enabled, this dialog will appear:
Note: The Enable USB Drive Mode option only appears in the Application Settings menu when you
are using a V420-F, which supports USB connectivity.

Omron MicroHAWK V320-F Specifications

General

Brand	Omron
Model	MicroHAWK V320-F
Category	Barcode Reader
Language	English