N-3
Appendices
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
N-2 Output Format Status
N
N-2-1 Output Format Status Disabled
N-2 Output Format Status
When Output Format Status is set to Disabled, output formatting is globally disabled.
When Output Format Status is set to Enabled, output formatting is enabled. However, Format
Assign, Format Insert, and Format Extract must be properly set up as well.
Definition: This is a global enable/disable parameter. In order to use formatting you
must set up the format using the insert and extract commands, and you
must also assign a symbol to format using the Format Assign command.
Serial Cmd: <K743,output format status>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
N-2-1 Output Format Status Disabled
N-2-2 Output Format Status Enabled
To Next Page
Loading...
