Omron MicroHAWK V320-F User Manual

F-1
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
F
After you’ve established communications and completed basic read rate testing, you
will need to address the spatial and timing parameters associated with your application.
This section explains those parameters.
F-1 Read Cycle Serial Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2
F-2 Read Cycle Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-3
F-3 Multisymbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-4
F-4 Trigger Mode and Filter Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-5
F-5 External Trigger Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-9
F-6 Serial Trigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10
F-7 Start Trigger Character (Non-Delimited) . . . . . . . . . . . . . . . . . . . . . . . . . . . F-11
F-8 Stop Trigger Character (Non-Delimited) . . . . . . . . . . . . . . . . . . . . . . . . . . F-12
F-9 End of Read Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-13
F-10 Capture Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-15
F-11 Capture Timing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-18
F-12 Image Processing Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-19
F-13 Image Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-20
F-14 Decodes Before Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-22
Read Cycle

Omron MicroHAWK V320-F Specifications

General

Brand	Omron
Model	MicroHAWK V320-F
Category	Barcode Reader
Language	English