Omron MicroHAWK V320-F User Manual

Appendices
H-38
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
H-16 Diagnostics Output 1
When Diagnostic Warning is enabled, the Output On configuration has no effect. The output will
remain active as long as one of the diagnostic warning conditions is met. The output will become
inactive once it detects that there are no diagnostic warning conditions.
Serial Cmd: < K790,unused 1 ,service unit>
Default: 0
Options: 0 = Disabled
H-16-1 Service Unit
Definition: Allows the user to set up the output to toggle to active when the service timer
has expired. This condition will only be held for one service timer click.
Note: This feature cannot be used if the reader is in a Continuous Read
mode.
Serial Cmd: <
K790, unused 1, service unit >
Default: 0
Options: 0 = Disabled 1 = Enabled

Omron MicroHAWK V320-F Specifications

General

Brand	Omron
Model	MicroHAWK V320-F
Category	Barcode Reader
Language	English