Omron MicroHAWK V320-F User Manual

H-43
Appendices
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
H-18 Power On/Reset Counts
H
H-17-14 Diagnostics Output 3
H-18 Power On/Reset Counts
• Note: Power On/Reset Counts is a read-only command.
Power-On uses a 16-bit counter that increments each time the reader is powered-on.
Resets uses a 16-bit counter that increments each time the reader is reset. This value is reset at
power-on.
Power-On Saves uses a 16-bit counter that increments each time an reader setting is saved for power-
on with a <Z> command.
Power-On Flash Saves uses a 16-bit counter that increments each time an reader setting is saved to
the customer parameter section of flash memory with a <Zc> command.
Power-On
Serial Cmd: < K406,power-on ,resets,power-on saves,power-on flash saves>
Resets
Serial Cmd: < K406, power-on, resets ,power-on saves,power-on flash saves>
Power-On Saves
Serial Cmd: < K406, power-on,resets, power-on saves ,power-on flash saves>
Power-On Flash Saves
Serial Cmd: < K406, power-on,resets,power-on saves, power-on flash saves >

Omron MicroHAWK V320-F Specifications

General

Brand	Omron
Model	MicroHAWK V320-F
Category	Barcode Reader
Language	English