Omron MicroHAWK V320-F - ISO;IEC 16022 Symbol Quality Output 1

H-21
Appendices
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
H-12 ISO/IEC 16022 Symbol Quality Output 1
H
H-11-4 Decodes per Trigger Threshold
H-12 ISO/IEC 16022 Symbol Quality
Output 1
 Output on Symbol Contrast
 Output on Print Growth
 Output on Axial Non-Uniformity
 Output on Unused Error Correction
Usage: Lets the user know if symbol quality is less than acceptable.
Definition: If enabled, toggles Output 1 to an active state when
Symbol Contrast
Threshold
is met.
Serial Cmd: <
K800,output on symbol contrast ,symbol contrast threshold,output on print
growth,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: Lets the user know if symbol quality is less than acceptable.
Definition: If enabled, toggles
Output 1 to an active state when Print Growth Threshold
is met.
Serial Cmd: <
K800, output on symbol contrast,symbol contrast threshold, output on print
growth ,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: Lets the user know if symbol quality is less than acceptable.
Definition: If enabled, toggles
Output 1 to an active state when Axial Non-Uniformity
Threshold
is met.
Serial Cmd: <
K800, output on symbol contrast,symbol contrast threshold,output on print
growth,print growth threshold, output on axial non-uniformity ,axial non-uniformity
threshold,output on UEC,UEC threshold>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Usage: Lets the user know if symbol quality is less than acceptable.
Definition: If enabled, toggles
Output 1 to an active state when UEC Threshold is met.
Serial Cmd: <
K800, output on symbol contrast,symbol contrast threshold,output on print
growth,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,
output on UEC ,UEC threshold>
Default: Disabled
Options: 0 = Disabled 1 = Enabled