K-15
Appendices
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
K-11 Damaged Symbol
K
K-10-2 Operator Size
K-11 Damaged Symbol
Definition: When Damaged Symbol is enabled, the reader will make additional
attempts to decode damaged Code 128 and Code 39 symbols. It is effective
on symbols with high noise and partial bar missing. Enabling Damaged
Symbol may significantly increase decode time.
Serial Cmd: <K519,damaged symbol status>
Default: Disabled
Options: 0 = Disabled
1 = Enabled
To Next Page
Loading...
