Omron MicroHAWK V320-F User Manual

Appendices
G-18
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
G-12 UPC/EAN
UPC Supplementals will not be decoded.
When enabled, the reader will try to decode a main and a supplemental.
Usage:
Used primarily in point-of-sale applications in the retail industry. It is commonly
used with the readers in applications in combination with Matchcode when
there is a need to verify that the right product is being placed in the right
packaging.
Definition: UPC (Universal Product Code) is a fixed length, numeric, continuous
symbology. UPC can have two- or five-digit supplemental bar code data
following the normal code. The UPC Version A (UPC, A) symbol is used to
encode a 12 digit number. The first digit is the number system character,
the next five are the manufacturer number, the next five are the product
number, and the last digit is the checksum character.
When enabled, the reader will read UPC Version A and UPC Version E
only.
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: Enabled
Options: 0 = Disabled 1 = Enabled
G-12-1 EAN Status
Usage: EAN is the European version of the UPC symbology and is used in European
market applications.
Note: UPC must be enabled for EAN to take effect.
Definition: EAN is a subset of UPC. When enabled, the reader will read UPC Version
A, UPC Version E, EAN 13, and EAN 8. It also appends a leading zero to
UPC Version A symbol information and transmits 13 digits. If transmitting
13 digits when reading UPC Version A symbols is not desired, disable EAN.
Note: The extra character identifies the country of origin.
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: Enabled
Options: 0 = Disabled 1 = Enabled
G-12-2 Supplemental Status (UPC/EAN)
Usage: Reads Supplementals typically used in publications and documentation.
Definition: A supplemental is a 2 to 5 digit symbol appended to the main symbol.
When set to Enabled or Required, the reader reads supplemental code
data that has been appended to the standard UPC or EAN codes.
Serial Cmd: <K473,UPC status,EAN status,supplementals status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Default: Disabled
Options: 0 = Disabled 1 = Enabled 2 = Required
Disabled
Enabled

Omron MicroHAWK V320-F Specifications

General

Brand	Omron
Model	MicroHAWK V320-F
Category	Barcode Reader
Language	English