8 Advanced Settings
8-2
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
8-1 Introduction
When you click the gear icon to bring up the Application Settings menu, one of the options you will
see is Advanced.
WebLink's Advanced Settings allow you to make fine adjustments to individual command parameters
in all areas of your reader's functionality: Camera Setup, Communications, Read Cycle,
Symbologies, I/O, Symbol Quality, Match String, Diagnostics, Image Storage, and Configuration
Database. Many of these commands can be configured directly in the WebLink user interface, but all
parameters can be configured and examined in Advanced Settings.
Advanced Settings are an efficient way to transmit complex commands with multiple parameters to the reader.
Each menu of Advanced Settings commands is shown in the following nine sections, and an additional
section is included that shows an example of the Differences from Default menu, which shows only
commands that are different from WebLink defaults.
To Next Page
Loading...
