4-7
4 Setup
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
4-3 Decode
4
4-3-1 Code Types and Symbology Settings
4-3 Decode
The Decode area of the Setup view allows you to choose which code types you want to enable, and to
configure the parameters for those code types.
In the example below, all code types are enabled.
You can add code types by clicking in an empty section of the field where code types are displayed, and
then selecting the desired code types from the dropdown menu.
4-3-1 Code Types and Symbology Settings
To Next Page
Loading...
