Omron MicroHAWK V320-F User Manual

Appendices
M-4
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
M-2 Read Rate
Sending <C> instructs the reader to transmit the decodes per second and symbol data (if any). The
decode rate can vary dramatically due to the angle and location of the symbol in relation to the field of
view. This test is very useful in aligning and positioning the reader during setup.
Sending <Cp> instructs the reader to transmit the percentage of decodes and any decoded symbol data.
Sending <J> ends both the Percent test and the Decodes/Second test.
M-2-1 Read Rate Serial Utility Commands
Enter Decodes/Second Test
Enter Percent Test
End Read Rate Test

Omron MicroHAWK V320-F Specifications

General

Brand	Omron
Model	MicroHAWK V320-F
Category	Barcode Reader
Language	English