Omron MicroHAWK V320-F - Page 160

8-15
8 Advanced Settings
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
8-6 I/O
8
8-6-2 Symbol Grading
 Decode Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Contrast
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Contrast Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Min Reflectance
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Min Reflectance Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Min Edge Contrast
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Min Edge Contrast Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Modulation
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Modulation Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Defects
Disabled
This will not be evaluated to drive the output.