Omron MicroHAWK V320-F - Page 168

8-23
8 Advanced Settings
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
8-6 I/O
8
8-6-2 Symbol Grading
 Output on Overall Grade
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Overall Grade Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Cell Contrast
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Cell Contrast Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Cell Modulation
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Cell Modulation Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Fixed Pattern Damage
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.
 Fixed Pattern Damage Threshold
This is to use as a threshold for driving the output. Output will be driven if grade is under the threshold.
 Axial Non-Uniformity
Disabled
This will not be evaluated to drive the output.
Enabled
This will be evaluated against the corresponding threshold to drive the output.