Appendices
G-24
MicroHAWK V320-F / V330-F / V420-F / V430-F Barcode Reader User Manual
When KIX is enabled (<K460,5>), the reader will only decode KIX symbols.
When
UPU
is enabled, the reader will decode UPU symbols
.
For example, if Postal Symbology Type is set to UPU and POSTNET Status is enabled and
(<K460,6,1>), the reader will attempt to decode both UPU and POSTNET symbols.
KIX
UPU
G-14-2 POSTNET Status
Usage: POSTNET is used by the United States Postal Service to direct mail. The
ZIP Code or ZIP+4 Code is encoded in the symbol. Data is encoded in
half-height and full-height bars, making POSTNET a “2-state” symbology.
The delivery point (usually the last two digits of the address or post office
box number) is also typically encoded in POSTNET symbols.
Definition: If U.S. Post and POSTNET Status are both enabled, the reader will
decode POSTNET symbols.
Serial Cmd: <K460,postal symbology type,POSTNET status,PLANET status,
USPS4CB status>
Default: Enabled
Options: 0 = Disabled
1 = Enabled
G-14-3 PLANET Status
Usage: PLANET (Postal Alphanumeric Encoding Technique) is a symbology
used by the United States Postal Service to track and identify items during
delivery. Each PLANET symbol is either 12 or 14 digits long, and encodes
data in half-height and full-height bars, making PLANET a “2-state” symbology.
The symbol always starts and ends with a full-height bar, or “guard rail”,
and each individual digit is represented by a set of five bars in which two of
the bars are always short.
Definition: If U.S. Post and PLANET Status are both enabled, the reader will decode
PLANET symbols.
Serial Cmd: <K460,postal symbology type,POSTNET status,PLANET status,
USPS4CB status>
Default: Enabled
Options: 0 = Disabled
1 = Enabled
To Next Page
Loading...
Need help?
General
