Install the Right LED/USB Indicator Module
Slightly push the disk cage assembly into the server chassis to ensure that the disk cage screw
holes are correctly aligned with the server chassis.
3.
Reconnect the left LED indicator module cable and the right LED/USB indicator
module cable to the motherboard [2 and 3].
4.
Reconnect all cables to the front storage drive backplane.
See the procedures for your storage drive configuration in “Servicing the Storage Drive
Backplanes” on page 112.
5.
Install the fan modules in the server.
See “Install a Fan Module” on page 70.
Servicing Components That Require Server Power-Off 143
To Next Page
Loading...
